Engine Intake Manifold - Dorman (615-311)
Sale Price$470.49
Description : On certain vehicles with Chrysler EcoDiesel V6 engines, soot buildup in the intake manifold can cause a severe loss of power, smoke, and a burning smell. A dealer recall addresses failing EGR coolers on some EcoDiesels, but even if a cooler has been repaired under warranty, it may have already caused problems downstream that aren't immediately noticeable. Soot can accumulate inside the manifold, preventing proper operation of the IMRC system, while regeneration cycles to help clean the diesel particulate filter add even more soot and heat from the EGR system. Ultimately the soot buildup acts as an insulator, causing trapped heat to warp the manifold and create a leak. Manifold runners and the MAP sensor can also be damaged or melted, creating a burning polymer residue that adds to the fouling of the IMRC system. This upgraded Dorman OE FIX intake manifold features a deeper, more protective skirt on the sensor shroud, allowing the MAP sensor to be located farther out of the path of hot EGR gases. These engineering improvements can more effectively divert EGR heat and soot through the intake for a more reliable repair than the original design. This manifold can also help reduce cost by allowing still-functional sensors to be swapped into the new manifold, vs. the OEM replacement which can only be purchased with the MAP sensor, IMRC motor, and both runner sensors.
INTAKE MANIFOLD
Engine, Intake, Manifold, Manifolds
Plenum
INTAKE MANIFOLD
Engine, Intake, Manifold, Manifolds
Plenum
- Min. 12 Months
- Safe, Secure Checkout
Product Details
Description
On certain vehicles with Chrysler EcoDiesel V6 engines, soot buildup in the intake manifold can cause a severe loss of power, smoke, and a burning smell. A dealer recall addresses failing EGR coolers on some EcoDiesels, but even if a cooler has been repaired under warranty, it may have already caused problems downstream that aren't immediately noticeable. Soot can accumulate inside the manifold, preventing proper operation of the IMRC system, while regeneration cycles to help clean the diesel particulate filter add even more soot and heat from the EGR system. Ultimately the soot buildup acts as an insulator, causing trapped heat to warp the manifold and create a leak. Manifold runners and the MAP sensor can also be damaged or melted, creating a burning polymer residue that adds to the fouling of the IMRC system. This upgraded Dorman OE FIX intake manifold features a deeper, more protective skirt on the sensor shroud, allowing the MAP sensor to be located farther out of the path of hot EGR gases. These engineering improvements can more effectively divert EGR heat and soot through the intake for a more reliable repair than the original design. This manifold can also help reduce cost by allowing still-functional sensors to be swapped into the new manifold, vs. the OEM replacement which can only be purchased with the MAP sensor, IMRC motor, and both runner sensors.
INTAKE MANIFOLD
Engine, Intake, Manifold, Manifolds
Plenum
INTAKE MANIFOLD
Engine, Intake, Manifold, Manifolds
Plenum
Features & Benefits
- Increases reliability - this upgraded intake manifold design features a deeper, more protective sensor shroud skirt and allows the MAP sensor to be located farther out of the path of EGR gases
- Saves time - cleaning soot buildup off a plastic manifold without damaging the manifold itself is time-consuming and difficult; replacement is a more efficient and effective repair
- Saves money - allows existing functional sensors to be swapped into the new manifold, vs. the OEM replacement which can only be purchased with the MAP sensor, IMRC motor, and both runner sensors
- Restores proper operation - engineered to help restore engine power to proper level and clear corresponding trouble codes, including P2020 and P200A
Part Number (MPN)
615-311
Brand
SKU
615-311
UPC / GTIN
889245688521 / 00889245688521
Condition
New
Position
Upper
Brand
Dorman - OE Solutions
Air Conditioning Compressor Mount
No
Alternator Mount
No
CNC Ported
No
Center Maximum Height
6
Deck Height
5
EGR Ready
Yes
Front Maximum Height
6.7
Gasket Or Seal Included
Yes
Grade Type
Standard Replacement
Heated Choke Port
No
High-Riser
No
Installation Instructions Included
No
Length
15
Manifold Height (in)
6.7 in
Material
Plastic
Mounting Hole Diameter
0.125
Mounting Hole Quantity
11
Package Contents
1 Intake Manifold
Port Outlet Dimensions
2.5
Port Quantity
12
Rear Maximum Height
6.7
Single Or Dual Plane Type
Single Plane
Street Legal
Yes
Width
7
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|---|---|---|---|
Vehicle #1
Year
Make
Model
Body & Trim
Engine & Transmission
| Brand | Equivalent Part Numbers |
|---|---|
BrandEquivalent Part Numbers
Chrysler
68211167AC, 68492577AA, 68211167AA, 68211167AB, 68490098AA
Shipping Policy
- In stock orders ship within 24 - 48 hours.
- Weekend orders will be processed the next business day.
- If a part is not in stock and must be ordered from the manufacturer, it usually takes 2-3 days to arrive to us and will be promptly shipped to you. Most of the orders are shipped complete within 2-3 business days. A few of the parts ordered from the manufacturer may take up to 5-6 business days to arrive and will shipped to you immediately.
- Depending upon location, ground shipments usually take 2-7 days.
- Your order may be shipped Express for an additional cost.
- Oversized shipments will be additional; you will be contacted prior to shipping for approval.
- We cannot guarantee transit times for ground and oversize orders.
- Shipping Carrier substitutions may be made at our discretion in an attempt to reduce shipping costs to the customer.
- We do not ship internationally.
- In the unlikely event that a part has been placed on backorder or discontinued, we will do our best to try and find one for you as quickly as possible.
- We do not ship COD orders.
Check out our Shipping Policy for more details.
Return Policy
- Contact us to arrange for any returns.
- A copy of the invoice will need to be included with the return.
- There is a 15% restocking fee charged against all returned parts.
- Parts must be resaleable and in the original packaging.
- We cannot take back used parts.
- We cannot take back installed or tried parts.
- Electrical parts are not returnable.
- We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria.
- Return request need to be within 30 days of receipt.
Cancellation Policy
- An order or a portion of an order may be cancelled up until the time it is shipped and no longer in our possession.
- If the cancelled part was special ordered from the manufacturer a return fee of 15% may apply.
Check out our Return Policy for more details.
New Auto Parts, Inc.
NewAutoParts.com is owned and operated by New Auto Parts, Inc, an independent reseller of genuine OEM automotive parts and accessories. Visit us for unbeatable prices, worldwide shipping, and exceptional customer service.