Front Lower Ball Joint - ACDelco (46D2026A)

ACDelcoMPN46D2026A
Sale Price$24.10
Description : ACDelco Silver (Advantage) Suspension Ball Joints are a quality, high value alternative for General Motors vehicles as well as most makes and models and are backed by General Motors. These suspension ball joints connect your vehicle's control arm to its steering knuckle, and feature a polychloroprene (neoprene) dust boot on most applications, and one-piece housing. It also includes studs and all hardware. ACDelco Silver (Advantage) parts are a good choice for many vehicles on the road today. Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage. ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
suspension-ball-joint;ball-joint;suspension-joint;suspension-ball
My Location
  • Min. 12 Months
  • Safe, Secure Checkout

Product Details

Description

ACDelco Silver (Advantage) Suspension Ball Joints are a quality, high value alternative for General Motors vehicles as well as most makes and models and are backed by General Motors. These suspension ball joints connect your vehicle's control arm to its steering knuckle, and feature a polychloroprene (neoprene) dust boot on most applications, and one-piece housing. It also includes studs and all hardware. ACDelco Silver (Advantage) parts are a good choice for many vehicles on the road today. Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage. ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
suspension-ball-joint;ball-joint;suspension-joint;suspension-ball

Part Number (MPN)
46D2026A
Brand
SKU
46D2026A
UPC / GTIN
195491480971 / 00195491480971
Condition
New
Other Names
19460489
Position
Front Lower
Brand
ACDelco Silver
Adjustable
No
Ball Joint Assembly
Yes
Bushings Included
No
Castle Nut Included
Yes
Cotter Pin Hole
Yes
Cotter Pin Included
Yes
Dust Boot Included
Yes
Dust Boot Material
Neoprene
FAQ - Answer 1
Yes. ACDelco Advantage Chassis parts are for both GM and non-GM vehicle applications.
FAQ - Answer 2
Yes. You should replace your ball joints as a set to make front end alignment easier.
FAQ - Answer 3
Yes. Installing new ball joints can interfere with the alignment of your vehicle, so a full four-wheel vehicle alignment is recommended following ball joint replacement.
FAQ - Question 1
Can I use ACDelco Advantage Chassis parts on my non-GM vehicle?
FAQ - Question 2
Should I replace my ball joints as a set?
FAQ - Question 3
Should I perform a vehicle alignment after installing ball joints?
Features & Benefits - Bullet 1
Manufactured at ISO 9001-certified facilities
Features & Benefits - Bullet 2
Greaseable where applicable
Features & Benefits - Bullet 3
Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage
Features & Benefits - Bullet 4
Economical value with dependable quality
Features & Benefits - Bullet 5
For General Motors vehicles as well as most makes and models
Good Maintenance Practices - Section 1 - Bullet 1
Use new components during installation. If you replace your vehicle's ball joints, make sure to use new mounting hardware, rather than reusing the old.
Good Maintenance Practices - Section 1 - Bullet 2
Avoid replacing only one ball joint at a time. If you choose to replace a ball joint, you should consider replacing ball joints as a set to make alignment easier.
Good Maintenance Practices - Section 1 - Bullet 3
Installing a new ball joint can interfere with the alignment of your vehicle. Perform a full four-wheel vehicle alignment after any ball joint replacement.
Good Maintenance Practices - Section 1 - Header
Inspect or have your ball joints inspected for signs of wear. Over time, lubrication inside the ball joint can dry out, leading to joint wear. Even sealed ball joints can be exposed to air, and if the ball joint's protective boot is damaged, dirt and debris could further harm the function and life of the joint. Exposure to harsh driving conditions like pot holes, bumpy road surfaces, or road salt may also cause ball joints to fail. Worn ball joints could result loss of vehicle control or tire damage. Inspect your ball joints regularly, following exposure to events that may harm the component, or when you experience signs of ball joint wear.
Grease Fitting Included
Yes
Greaseable
Yes
Height
3.4<br />86.36
Length
5.3<br />134.62
Material
Steel
Maximum Outside Diameter
2.08
Mounting Hardware Included
Yes
PADB ID 2076
0.563
PADB ID 9214
18
Signs of Wear & Troubleshooting - Section 1 - Bullet 1
Tire wear: as ball joints wear, they allow the front wheels of your vehicle to point outward and away from each other in a 'toe-out' position. This position will result in uneven wear on one side of your tire that feathers across the tread toward its center. Worn ball joints may also be signaled by a more extreme variation of uneven tire wear, called camber wear, where the tire leans in or out at the top, and a hard line of excess wear is seen along one edge of your vehicle's tire.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2
Alignment issues: an inability to set your vehicle's alignment to proper specifications may be a sign of ball joint wear.
Stud Tapered End 1 Diameter
0.795
Stud Tapered End 2 Diameter
0.628
Stud Type
Threaded
Suspension Grade Type
Standard
Width
124.46
Width (in)
4.9

YearMakeModelBody & TrimEngine & Transmission
Vehicle #1
Year
Make
Model
Body & Trim
Engine & Transmission

BrandEquivalent Part Numbers

Rows per page:

0-0 of 0

BrandEquivalent Part Numbers
ACDelco
45D2026
BRUTE POWER
8470022
CTR
CB0062, CBG-20
Centric Parts
610.62001
DELPHI
TC1601
Dorman
540-083, BJ92065
Falcon Steering Systems
K6145T

Shipping Policy

  • In stock orders ship within 24 - 48 hours.
  • Weekend orders will be processed the next business day.
  • If a part is not in stock and must be ordered from the manufacturer, it usually takes 2-3 days to arrive to us and will be promptly shipped to you. Most of the orders are shipped complete within 2-3 business days. A few of the parts ordered from the manufacturer may take up to 5-6 business days to arrive and will shipped to you immediately.
  • Depending upon location, ground shipments usually take 2-7 days.
  • Your order may be shipped Express for an additional cost.
  • Oversized shipments will be additional; you will be contacted prior to shipping for approval.
  • We cannot guarantee transit times for ground and oversize orders.
  • Shipping Carrier substitutions may be made at our discretion in an attempt to reduce shipping costs to the customer.
  • We do not ship internationally.
  • In the unlikely event that a part has been placed on backorder or discontinued, we will do our best to try and find one for you as quickly as possible.
  • We do not ship COD orders.
Check out our Shipping Policy for more details.

Return Policy

  • Contact us to arrange for any returns.
  • A copy of the invoice will need to be included with the return.
  • There is a 15% restocking fee charged against all returned parts.
  • Parts must be resaleable and in the original packaging.
  • We cannot take back used parts.
  • We cannot take back installed or tried parts.
  • Electrical parts are not returnable.
  • We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria.
  • Return request need to be within 30 days of receipt.

Cancellation Policy

  • An order or a portion of an order may be cancelled up until the time it is shipped and no longer in our possession.
  • If the cancelled part was special ordered from the manufacturer a return fee of 15% may apply.
Check out our Return Policy for more details.


New Auto Parts, Inc.

NewAutoParts.com is owned and operated by New Auto Parts, Inc, an independent reseller of genuine OEM automotive parts and accessories. Visit us for unbeatable prices, worldwide shipping, and exceptional customer service.