Image is not a representation of the actual product
Rear Brake Rotor - ACDelco (84450466)
Sale Price$120.72
Outside Diameter13.15<br />334
Description : ACDelco GM Original Equipment Disc Brake Rotors are metal discs mounted to the wheel hub where the caliper can press the brake pads against the disc surfaces to slow the vehicle, and are GM-recommended replacements for your vehicle's original components. These disc brake rotors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
disc-brake-rotor;rotor;brake-rotor;disc-brake;
disc-brake-rotor;rotor;brake-rotor;disc-brake;
- Return Policy
- Min. 12 Months
- Safe, Secure Checkout
Product Details
Description
ACDelco GM Original Equipment Disc Brake Rotors are metal discs mounted to the wheel hub where the caliper can press the brake pads against the disc surfaces to slow the vehicle, and are GM-recommended replacements for your vehicle's original components. These disc brake rotors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
disc-brake-rotor;rotor;brake-rotor;disc-brake;
disc-brake-rotor;rotor;brake-rotor;disc-brake;
Part Number (MPN)
84450466
Brand
SKU
84450466
UPC / GTIN
193468708776 / 00193468708776
Condition
New
Other Names
84450466
Position
Rear
Brand
ACDelco GM Original Equipment
ABS Tone Ring Included
No
Bearings Included
No
Bolt Hole Diameter (in)
0.65
Bolt Hole Diameter (mm)
16.43
Bolt Hole Quantity
8
Construction
Full Cast
Directional or Non-Directional Brake Surface
Non-Directional
Disc Finish
Ground
Features & Benefits - Bullet 1
Inspected for balance, resulting in smooth brake operation and noise reduction
Features & Benefits - Bullet 2
GM-recommended replacement part for your GM vehicle's original factory component
Features & Benefits - Bullet 3
Offering the quality, reliability, and durability of GM OE
Features & Benefits - Bullet 4
Manufactured to GM OE specification for fit, form, and function
Good Maintenance Practices - Section 1 - Bullet 1
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header
The following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header
The following should be conducted by a qualified technician:
Grade Type
Regular
Height (in)
13.15
Height (mm)
334
Inside Diameter
7.92<br />201.2
Length (in)
13.9
Material
Cast Iron
Mounting Bolt Hole Circle Diameter
166.6<br />6.56
Nominal Thickness
1.65<br />42
Outside Diameter
13.15<br />334
Overall Height
5.8<br />147.32
Rust Resistant Coating
Yes
Signs of Wear & Troubleshooting - Section 1 - Bullet 1
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2
Visible ridges or deep grooves on the rotor surface.
Solid Or Vented Type Rotor
Vented
Stud/Lug Hole Circle Diameter (in)
#REF!
Stud/Lug Hole Circle Diameter (mm)
#REF!
Stud/Lug Hole Diameter
16.43<br />0.65
Stud/Lug Hole Quantity
8
Surface Type
Smooth
Weight (lb)
41.85
Width (in)
13.9
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|---|---|---|---|
Vehicle #1
Year
Make
Model
Body & Trim
Engine & Transmission
| Brand | Equivalent Part Numbers |
|---|---|
BrandEquivalent Part Numbers
GM
84450466
Shipping Policy
In stock orders ship within 24 - 48 hours... Check out our Shipping Policy for more details.
Return Policy
Contact us to arrange for any returns... Check out our Return Policy for more details.
New Auto Parts, Inc.
NewAutoParts.com is owned and operated by New Auto Parts, Inc, an independent reseller of genuine OEM automotive parts and accessories. Visit us for unbeatable prices, worldwide shipping, and exceptional customer service.